+86-17773276726
[email protected]
Sitemap | RSS | XML
English English
Lead acid battery recovery auxiliary system
Home > PRODUCTS > Lead acid battery recovery and regeneration system > Lead acid battery recovery auxiliary system

Lead acid battery recovery auxiliary system

Lead acid battery Recovery auxiliary system mainly includes: lead paste pre desulfurization, neutralization treatment of acid solution, sodium sulfate solution purification system, sulfur sulfate crystallization system, etc. Due to the acid environment system, the requirements for each system are very high, so the higher the degree of automation, the better

PLC centralized control mode is adopted in the whole system, with two working states of full-automatic and manual, which is more convenient for operation and management. Each actuator is equipped with manual buttons on the control cabinet to facilitate debugging, maintenance and ensure normal production in case of automatic failure. In order to ensure the absolute safety and reliability of the control cabinet, the main control electrical products are world-famous high-end products (the main control electrical products are Schneider, the PLC brand is Siemens, and the instruments are international and domestic well-known brands, such as GF, coreda, chengci, etc.); The control cabinet provided can meet the ambient temperature (-10 ℃ - +50 ℃) and the vibration requirements of the support structure, and comply with ip52 standard (for indoor installation) and relevant specifications; The design, material selection and strength of the control cabinet meet the requirements of national standards and specifications, and the internal and external surfaces are smooth and tidy; The control cabinet is equipped with ventilation device to ensure that the internal temperature during operation does not exceed the limit value of the allowable temperature of the equipment; Power switch, standard socket and lighting lamp are set inside the control cabinet; The metal structural parts in the panel, table and cabinet are firmly and reliably grounded, and independent PLC DC ground, chassis safety ground, cable shielding ground contact terminals and structures are set, which are electrically isolated from the internal ungrounded circuit board.

Lufeng has rich experience and can meet the project needs of customers with different processing capacity.

View as  
 

  • 50T per day automatic crusher and sorting system for scrap lead battery recycle machine This utility model discloses an automatic crushing and sorting system for waste lead-acid batteries, belonging to the field of waste lead-acid battery recycling and treatment. The system includes a cutting and feeding subsystem, a crushing subsystem, a sorting subsystem, and a pressure filtration and desulfurization subsystem; The discharge end of the cutting and feeding subsystem is sequentially connected to the crushing subsystem, sorting subsystem, and pressure filtration desulfurization subsystem; The crushing subsystem includes: a first stage high-speed rotating thick blade crusher, a crushing water pump, a first stage conveyor, a second stage high-speed rotating thin blade crusher, and a second stage conveyor. Through the cooperation of various systems, accurate sorting of batteries and their upper partitions, various light and heavy plastics is achieved, avoiding high energy consumption and environmental pollution during subsequent processing

    Read More Send Inquiry Read More

  • lufeng brand customized size lead refining furnace pot cover for lead smelting kettle Lead pot cover The cover plate is composed of 10mm thick steel plates5) Furnace insulation cover (movable): outer layer 6mm, inner layer 60mmHeat insulation (the furnace insulation cover is formed by one-time stamping,Manual lifting, capable of 360 degree rotation) Cover for lead potThe utility model discloses a lead pot cover that is convenient for removing slag from lead liquid, and relates to the technical field of battery production. The utility model includes a lead pot cover and a slag removal device; The lead pot cover includes a cover ring and a cover plate; The upper surface of the cover plate is provided with a radially arranged rectangular groove; The bottom surface of the rectangular groove is provided with a slag removal port; One side of the slag removal port is fixedly connected with a conduit side by side; The slag removal device includes a fixed rod that matches the surface inside the conduit; Two fixing rods are fixedly connected with a handle on the upper and lower sides through a connecting block; A Rectangular cuboid slag leakage box is fixedly connected with the side faces of the lower ends of the two fixed rods through a connecting block. The utility model seals the lead pot by setting a lead pot cover matched with the lead pot, which solves the problem that the lead liquid in the existing lead pot is easy to contact with oxygen to produce lead slag, which affects the product quality; At the same time, the slag removal device can perform the slag removal operation without removing the lead pot cover, providing convenience for the slag removal of lead liquid and effectively ensuring the quality of lead liquid。

    Read More Send Inquiry Read More

  • simple design from china factory slag salvaging machine from smelting pot of lead refining furnace Salvaging slag machine The horizontal groove of the slag extractor is welded from steel plates and profiles, and is divided into two layers: upper and lower. The upper tank is equipped with cooling water, the bottom is paved with wear-resistant steel plate for hot slag cooling granulation, and the lower layer is paved with Diabase wear-resistant cast plate. The upper tank of the slag extractor is generally connected to a closed door to seal the bottom and improve the thermal efficiency of the boiler. The ash scraped by the scraper chain will be discharged through the inclined upward section of the chute to reduce the water content of the slag and ensure that it does not exceed 25%. The upper and lower chutes of the inclined upward section are laid with wear-resistant cast plates, with a service life of no less than 30 years.

    Read More Send Inquiry Read More

  • customized size pot cover for lead smelting refining furnace smelting pot Lead pot cover The cover plate is composed of 10mm thick steel plates5) Furnace insulation cover (movable): outer layer 6mm, inner layer 60mmHeat insulation (the furnace insulation cover is formed by one-time stamping,Manual lifting, capable of 360 degree rotation) Cover for lead potThe utility model discloses a lead pot cover that is convenient for removing slag from lead liquid, and relates to the technical field of battery production. The utility model includes a lead pot cover and a slag removal device; The lead pot cover includes a cover ring and a cover plate; The upper surface of the cover plate is provided with a radially arranged rectangular groove; The bottom surface of the rectangular groove is provided with a slag removal port; One side of the slag removal port is fixedly connected with a conduit side by side; The slag removal device includes a fixed rod that matches the surface inside the conduit; Two fixing rods are fixedly connected with a handle on the upper and lower sides through a connecting block; A Rectangular cuboid slag leakage box is fixedly connected with the side faces of the lower ends of the two fixed rods through a connecting block. The utility model seals the lead pot by setting a lead pot cover matched with the lead pot, which solves the problem that the lead liquid in the existing lead pot is easy to contact with oxygen to produce lead slag, which affects the product quality; At the same time, the slag removal device can perform the slag removal operation without removing the lead pot cover, providing convenience for the slag removal of lead liquid and effectively ensuring the quality of lead liquid。

    Read More Send Inquiry Read More

  • customized size of cover of smelting pot for lead smelting refining furnace from lufeng factory china Lead pot cover The cover plate is composed of 10mm thick steel plates5) Furnace insulation cover (movable): outer layer 6mm, inner layer 60mmHeat insulation (the furnace insulation cover is formed by one-time stamping,Manual lifting, capable of 360 degree rotation)

    Read More Send Inquiry Read More

  • customized slag removal machine after smelted metal machinery for scrap lead battery recycle Slag casting machine The slag casting machine is used for casting copper slag or lead slag. Copper slag is mainly used for casting converter slag, and lead slag is mainly high lead slag discharged from the casting oxidation furnace. Workflow: After the slag flows out of the furnace, it flows into the slag mold of the slag casting machine through a chute from the casting point. The slag mold is fixed on the chain conveyor, and the slag inside the slag mold is gradually transported from the casting point to the slag ingot outlet through the air and water cooling areas by the chain conveyor on the slag casting machine, and then discharged.

    Read More Send Inquiry Read More
Links：