View as  
 
  • lead battery scrap recycle electrolysis system machine line disc round crude lead anode plate casting machine Lead anode plate automatic line Firstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it. The disc rotates to the plate taking frame, and the proximity switch sends a signal to the PLC. The PLC sends instructions to the plate catching hook to automatically pick up the ingot and then transmit it to the conveyor belt. This plate catching hook has three hooks, and during one cycle of the disc rotation, The lead ingots are automatically picked up and transported to the conveyor belt in time and sections, forming an automatic flow process. The completion of this process mainly relies on the proximity switch providing different signals and the PLC setting different commands. 1. Main use: This equipment is matched with a lead melting furnace, and the molten lead is pumped into a lead ingot quantitative pouring container through a lead pump. The lead water is then quantitatively poured into the mold, cooled by the mold, and turned into a standard lead resistance plate. Then, it is transported to the plate conveyor through an automatic plate pulling and flat plate device. 2. Product composition: lead quantitative pouring device, disc rack, ingot mold, automatic plate pulling mechanism, flat plate mechanism, conveying and arranging plate transportation mechanism, and electrical control system.

  • lufeng brand customized size of lead anode plate hanger for electrolysis system line An anode hanger for electrolytic cells This utility model discloses an anode hanger for an electrolytic cell. The top of the copper beam is provided with several pole installation holes, and the copper beam is located on both sides of the pole installation hole with assembly holes and screw holes respectively. The two sides of the copper beam are symmetrically provided with several screw holes, and the bottom end of the electrode rod is equipped with a connection section. The electrode rod is inserted into the pole installation hole at the top of the copper beam through the connection section and connected with bolts, and the outer part of the electrode rod is equipped with a protective sleeve, The top of the protective sleeve is provided with a groove between the electrode rod and the electrode rod. The outer sleeve of the electrode rod is equipped with a screw thread, and the bottom end of the screw thread is arranged in the groove. The utility model has a reasonable structure, which is more convenient than traditional welding methods. On the one hand, it ensures the stability of the connection, and solves the problem of welding causing skewness. The upper end of the protective sleeve is provided with a groove, and the bottom end of the screw thread is located in the groove of the protective sleeve, greatly improving the stability of the screw thread and the protective sleeve, And reduce the probability of slipping, thereby ensuring overall performance

  • customized from lufeng factory flue gas desulfurization tank for air clean dust remove system Desulfurization technology The flue gas desulfurization technology, also known as the dual alkali flue gas desulfurization technology, was developed to overcome the disadvantage of easy scaling in the limestone lime method. There are dozens of types, and according to whether water is added during the desulfurization process and the dry and wet forms of desulfurization products, flue gas desulfurization can be divided into three major categories: wet, semi dry, and dry desulfurization processes. Wet desulfurization technology is relatively mature, efficient, and easy to operate. The traditional limestone/lime gypsum flue gas desulfurization process uses calcium based desulfurizers to absorb sulfur dioxide and generate calcium sulfite and calcium sulfate. Due to their low solubility, scaling and blockage phenomena are easily formed in the desulfurization tower and pipeline.

  • china factory sell directly 10KG TO 1000KG electric induction smelting furnace for melting iron copper aluminum An induction furnace with a frequency range of 150 to 10000 Hz is called an intermediate frequency induction furnace. The medium frequency induction furnace is a special smelting equipment suitable for smelting high-quality steel and alloys. It has advantages such as fast melting speed, high production efficiency, strong adaptability, flexible use, good electromagnetic stirring effect, convenient start-up operation, and steel liquid being covered by slag (reducing atmospheric pollution of steel liquid). The complete equipment of the medium frequency induction furnace includes: power supply and electrical control part, furnace body part, transmission device, and water cooling system. The medium frequency induction furnace is particularly suitable for large, medium, and small furnaces with a capacity of tens of tons of 10kg. It is used for melting steel, cast iron, copper, aluminum, and other non-ferrous metals and their alloys, as well as insulation of liquid metals. It has strong adaptability to furnace materials and is suitable for intermittent operations. The furnace structure and usage are similar to those of a power frequency coreless induction furnace. Since the 1970s, with the increasing power and reliability of high-efficiency, static, and metal saving thyristor intermediate frequency power supplies, intermediate frequency furnaces have developed rapidly both domestically and internationally. They not only have obvious advantages in small and medium-sized capacity, but also are replacing industrial frequency heartless induction furnaces in large capacity. [1]

  • LUFENG lead acid battery liquid pump electric high viscosity drum pump Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impeller。

  • industrial metal melting furnace mixer automatic lead liquid pot mixer lead battery recycling plant Lead liquid mixer During the impurity removal process of crude lead refining, it is necessary to put the refining auxiliary materials into a lead pot containing liquid lead liquid, and use a mixer to stir the lead liquid to promote contact between the auxiliary materials and the lead liquid. The conventional stirring method is to install vertical blades at the bottom of the stirring shaft, and place the stirring shaft at the center of the lead pot for stirring.