Products

New Products

Lufeng is a Professional metallurgical rotary furnace’s design, manufacturing and sales manufacturers in China. We have been specialized in Metallurgical equipment for many years. Our lead converter is driven by large and small gear rings. The bearing seat adopts heavy cast steel bearing seat, and the driving part is equipped with hydraulic brake. To ensure normal and safe production.

What are the advantages of rotary furnace:

Rotary furnace with Good adaptability. It can be used for the roasting and smelting for many type of materials. Its capacity can vary from 50-100%. Comparing with reverberatory furnace, it has higher production rate and lower fuel consumption;

Small length-diameter ratio, small temperature difference, quick heat transferring and uniform smelting temperature in the furnace;

High heat efficiency and good seal performance;

Furnace can rotate, which make the firebricks have a longer service life;

Have good operation environment with high mechanization level and low labor intensity;

The rotating speed can be adjusted according to process requirements;

Fuels can be diesel, natural gas, gas, powdered coal, or heavy oil, and so on. The off-gas after heat exchanger will enter surface cooler and then dust bag collector;

The melting rotary furnace is made of heat-resistant boiler steel, which can meet the working environment of high temperature. Our rotary furnace is driven by large and small gear rings. The bearing seat adopts heavy cast steel bearing seat, and the driving part is equipped with hydraulic brake. To ensure normal and safe production.

View as

10T lead acid fully automatic recycle machine gas melting furnace lead recycling rotary furnace
10T lead acid fully automatic recycle machine gas melting furnace lead recycling rotary  furnace  Rotary smelting furnace A rotary furnace is a type of blast furnace, whose body is an inclined cylindrical container that can rotate. The principle of rotary furnace is to use the effect of high temperature and high-speed Redox to mix ore and coke together, rapidly heat and melt in the furnace, and separate metal and waste slag. The internal parts of the rotary furnace are divided into different areas, with the top layer being the combustion zone, where coke and oxygen react to produce high-temperature and high-pressure gas flow. The gas flows downwards and enters the reduction zone. The ore and coke undergo a reduction reaction in the reduction zone, and the metal is reduced out. The metal flows downwards along the furnace barrel and finally reaches the slag area, where it is separated from the waste slag. The rotary furnace has the advantages of high production capacity and high melting efficiency, and can melt various metal materials such as iron, steel, and alloys. In the steel industry, rotary furnaces have become one of the main steelmaking equipment, widely used in fields such as steelmaking, ironmaking, and scrap recovery.   Lead scraps, Lead grid, Lead acid battery scrap, adaptable to different raw materials. The Lead melting rotary furnace consists of a rotary host, a fire-resistant furnace lining, a combustion system, a hydraulic system, a Ring gear transmission system and a flue system. Both charging and discharging pass through the furnace mouth installed with a furnace door. During charging and discharging, the furnace door installed with a burner can be opened. Auxiliary machines are equipped with supporting automatic feeding machine, automatic slag (soup) bag and slag raking machine, and automatic ingot casting and stacking machine. Through these supporting equipment, the automatic operation of the whole process can be realized.   Details include: - Refractory Material of Chrome-Magnesium basis - air-fuel burner or Oxy-fuel burner or Heavy oil burner - Feeding door opening through local control panel and through remote control - Door operation system with hydraulic unit; - Rotation system 0 - 1 rpm with variable speed driver (by VFD)
Read More Send Inquiry Read More
Made in China nature gas tilting type melting furnace copper melting furnace gas fired aluminum melting furnace for sale
Made in China nature gas tilting type melting furnace copper melting furnace gas fired aluminum melting furnace for sale Rotary tilting refining furnace The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace. The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal. When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent (coke or graphite) to the furnace material.
Read More Send Inquiry Read More
recycling gas rotary furnace for scrap lead battery other metal & metallurgy machinery
recycling gas rotary furnace for scrap lead battery other metal & metallurgy machinery Rotary smelting furnace A rotary furnace is a type of blast furnace, whose body is an inclined cylindrical container that can rotate. The principle of rotary furnace is to use the effect of high temperature and high-speed Redox to mix ore and coke together, rapidly heat and melt in the furnace, and separate metal and waste slag. The internal parts of the rotary furnace are divided into different areas, with the top layer being the combustion zone, where coke and oxygen react to produce high-temperature and high-pressure gas flow. The gas flows downwards and enters the reduction zone. The ore and coke undergo a reduction reaction in the reduction zone, and the metal is reduced out. The metal flows downwards along the furnace barrel and finally reaches the slag area, where it is separated from the waste slag. The rotary furnace has the advantages of high production capacity and high melting efficiency, and can melt various metal materials such as iron, steel, and alloys. In the steel industry, rotary furnaces have become one of the main steelmaking equipment, widely used in fields such as steelmaking, ironmaking, and scrap recovery.
Read More Send Inquiry Read More
tilting rotary type melting furnace for aluminum and scrap lead battery copper gas fired
tilting rotary type melting furnace for aluminum and scrap lead battery copper  gas fired Rotary tilting refining furnace The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace. The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal. When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent (coke or graphite) to the furnace material.
Read More Send Inquiry Read More
5T input metal & metallurgy machinery rotary tilting furnace for copper or aluminum smelting
5T input metal & metallurgy machinery rotary tilting furnace for copper or aluminum  smelting Rotary tilting refining furnace The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace. The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal. When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent (coke or graphite) to the furnace material.
Read More Send Inquiry Read More
scrap lead battery clinker rotary furnace 1200 degree for sale
scrap lead battery clinker rotary furnace 1200 degree for sale 
Read More Send Inquiry Read More

Products

Ingot Casting Machine

Melting Furnace

High temperature metal transfer pump

Electrolytic system

Smelting equipment accessories

Lead acid battery recovery and regeneration system

Lead Liquid Mixer

Ingot Molds

Lead Smelting Pot

Dust Collector System

Slag Casting Machine

New Products

lead acid battery recycling system lead anode plate casting machine electrolysis machine line

high temperature cast steel lead liquid or zinc transfer pump

Lead melting pot cover for lead refining furnace can custom size according requires or design

2024 hot selling Price lead light polishing rod machine for Scrap lead battery electrolysis system

customized size high temperature nodular cast iron materials zinc ingot molds lead molds

Rotary Furnace

10T lead acid fully automatic recycle machine gas melting furnace lead recycling rotary furnace

Made in China nature gas tilting type melting furnace copper melting furnace gas fired aluminum melting furnace for sale

recycling gas rotary furnace for scrap lead battery other metal & metallurgy machinery

tilting rotary type melting furnace for aluminum and scrap lead battery copper gas fired

5T input metal & metallurgy machinery rotary tilting furnace for copper or aluminum smelting

scrap lead battery clinker rotary furnace 1200 degree for sale