Products

New Products

Lufeng company adopts the most advanced Lead Acid Battery Recovery And Regeneration System process at home and abroad. Our core technology is to adopt an automatic crushing and sorting system with high automation, low energy consumption. Lead paste, lead grid and plastic can be selected separately. Then carry out lead paste pre desulfurization treatment, acid purification, crystallization, etc; Finally, the obtained lead paste is put into converter smelting, lead pot refining, ingot casting, etc. The whole process is simple, mature, efficient, energy-saving, environmental protection and other advantages. The waste water in the whole production process can be converted and recycled to achieve the standard discharge of industrial "three wastes".

Lufeng can complete the crushing and sorting of waste lead-acid batteries to the ingot of refined lead, and realize the Lead Acid Battery Recovery And Regeneration System.

View as

Car Lead Acid Battery Crushing And Separation Recycling Machine
Car Lead Acid Battery Crushing And Separation Recycling Machine
Read More Send Inquiry Read More
copper round tube polishing machine of cathode electrolytic polishing machine for metal
copper round tube polishing machine  of cathode electrolytic polishing machine for metal The light bar polishing machine is used to clean the cathode copper rod after electrolysis, ensuring good surface conductivity. There are two key points to note when operating the lead electrolysis light rod machine: One is that the copper rod is very heavy and difficult to transport after being pulled out; The second issue is that there is a lot of noise when cleaning copper bars. To solve these two problems, the existing light bar machine is designed with a bucket containing copper bars, which can be lifted by a crane, and the bucket can be directly placed on the frame of the light bar machine. The bucket door can be opened directly to allow the copper bars to fall directly into the cleaning drum. In addition, the surface of the cleaning drum is sandwich and equipped with thick soundproof cotton, which has a good soundproofing effect and improves the quality of the working environment. The inner liner is made of 304 material, which has good corrosion resistance. The entire equipment has been comprehensively considered in terms of performance, quality, and safety, and has been well received by multiple customers
Read More Send Inquiry Read More
lead anode plate hanger battery recycle machine for lead electrolysis cell
lead anode plate hanger  battery recycle machine for lead electrolysis cell   An anode hanger for electrolytic cells This utility model discloses an anode hanger for an electrolytic cell. The top of the copper beam is provided with several pole installation holes, and the copper beam is located on both sides of the pole installation hole with assembly holes and screw holes respectively. The two sides of the copper beam are symmetrically provided with several screw holes, and the bottom end of the electrode rod is equipped with a connection section. The electrode rod is inserted into the pole installation hole at the top of the copper beam through the connection section and connected with bolts, and the outer part of the electrode rod is equipped with a protective sleeve, The top of the protective sleeve is provided with a groove between the electrode rod and the electrode rod. The outer sleeve of the electrode rod is equipped with a screw thread, and the bottom end of the screw thread is arranged in the groove. The utility model has a reasonable structure, which is more convenient than traditional welding methods. On the one hand, it ensures the stability of the connection, and solves the problem of welding causing skewness. The upper end of the protective sleeve is provided with a groove, and the bottom end of the screw thread is located in the groove of the protective sleeve, greatly improving the stability of the screw thread and the protective sleeve, And reduce the probability of slipping, thereby ensuring overall performance
Read More Send Inquiry Read More
Design size cover melting pot for lead recycling machine of lead refining furnace
design size cover melting pot for lead recycling machine of lead refining furnace  Cover for lead pot The utility model discloses a lead pot cover that is convenient for removing slag from lead liquid, and relates to the technical field of battery production. The utility model includes a lead pot cover and a slag removal device; The lead pot cover includes a cover ring and a cover plate; The upper surface of the cover plate is provided with a radially arranged rectangular groove; The bottom surface of the rectangular groove is provided with a slag removal port; One side of the slag removal port is fixedly connected with a conduit side by side; The slag removal device includes a fixed rod that matches the surface inside the conduit; Two fixing rods are fixedly connected with a handle on the upper and lower sides through a connecting block; A Rectangular cuboid slag leakage box is fixedly connected with the side faces of the lower ends of the two fixed rods through a connecting block. The utility model seals the lead pot by setting a lead pot cover matched with the lead pot, which solves the problem that the lead liquid in the existing lead pot is easy to contact with oxygen to produce lead slag, which affects the product quality; At the same time, the slag removal device can perform the slag removal operation without removing the lead pot cover, providing convenience for the slag removal of lead liquid and effectively ensuring the quality of lead liquid。
Read More Send Inquiry Read More
lead pot cover for refining furnace of lead acid battery recycling plant
lead pot cover for refining furnace of lead acid battery recycling plant Lead pot cover The cover plate is composed of 10mm thick steel plates 5) Furnace insulation cover (movable): outer layer 6mm, inner layer 60mm Heat insulation (the furnace insulation cover is formed by one-time stamping, Manual lifting, capable of 360 degree rotation)  Cover for lead pot The utility model discloses a lead pot cover that is convenient for removing slag from lead liquid, and relates to the technical field of battery production. The utility model includes a lead pot cover and a slag removal device; The lead pot cover includes a cover ring and a cover plate; The upper surface of the cover plate is provided with a radially arranged rectangular groove; The bottom surface of the rectangular groove is provided with a slag removal port; One side of the slag removal port is fixedly connected with a conduit side by side; The slag removal device includes a fixed rod that matches the surface inside the conduit; Two fixing rods are fixedly connected with a handle on the upper and lower sides through a connecting block; A Rectangular cuboid slag leakage box is fixedly connected with the side faces of the lower ends of the two fixed rods through a connecting block. The utility model seals the lead pot by setting a lead pot cover matched with the lead pot, which solves the problem that the lead liquid in the existing lead pot is easy to contact with oxygen to produce lead slag, which affects the product quality; At the same time, the slag removal device can perform the slag removal operation without removing the lead pot cover, providing convenience for the slag removal of lead liquid and effectively ensuring the quality of lead liquid。
Read More Send Inquiry Read More
slag lead dragging machine battery recycling plant other metal & metallurgy machinery
slag lead dragging machine  battery recycling plant other metal & metallurgy machinery  Salvaging slag machine The horizontal groove of the slag extractor is welded from steel plates and profiles, and is divided into two layers: upper and lower. The upper tank is equipped with cooling water, the bottom is paved with wear-resistant steel plate for hot slag cooling granulation, and the lower layer is paved with Diabase wear-resistant cast plate. The upper tank of the slag extractor is generally connected to a closed door to seal the bottom and improve the thermal efficiency of the boiler. The ash scraped by the scraper chain will be discharged through the inclined upward section of the chute to reduce the water content of the slag and ensure that it does not exceed 25%. The upper and lower chutes of the inclined upward section are laid with wear-resistant cast plates, with a service life of no less than 30 years.
Read More Send Inquiry Read More

Products

Ingot Casting Machine

Melting Furnace

High temperature metal transfer pump

Electrolytic system

Smelting equipment accessories

Lead acid battery recovery and regeneration system

Lead Liquid Mixer

Ingot Molds

Lead Smelting Pot

Dust Collector System

Slag Casting Machine

New Products

lead copper slag casting after smelting furnace recycle production line

waste lead acid battery manufacturing plant recycle automatic crusher and sorting machine system

Copper concentrate refining electrolysis system anode electrolytic round disc plate casting machine

Metal & metallurgy machinery copper lead anode plate hanger metal for scrap lead battery electrolysis recycle machine

Lead acid battery recycling system lead anode plate casting machine electrolysis machine line

Lead acid battery recovery and regeneration system

Car Lead Acid Battery Crushing And Separation Recycling Machine

copper round tube polishing machine of cathode electrolytic polishing machine for metal

lead anode plate hanger battery recycle machine for lead electrolysis cell

Design size cover melting pot for lead recycling machine of lead refining furnace

lead pot cover for refining furnace of lead acid battery recycling plant

slag lead dragging machine battery recycling plant other metal & metallurgy machinery