slag dragging machine semiautomatic slag extractor for lead smelting refining furnace

PRODUCT NAME:

slag dragging machine semiautomatic slag extractor for lead smelting refining furnace 

Salvaging slag machine

The horizontal groove of the slag extractor is welded from steel plates and profiles, and is divided into two layers: upper and lower. The upper tank is equipped with cooling water, the bottom is paved with wear-resistant steel plate for hot slag cooling granulation, and the lower layer is paved with Diabase wear-resistant cast plate. The upper tank of the slag extractor is generally connected to a closed door to seal the bottom and improve the thermal efficiency of the boiler. The ash scraped by the scraper chain will be discharged through the inclined upward section of the chute to reduce the water content of the slag and ensure that it does not exceed 25%. The upper and lower chutes of the inclined upward section are laid with wear-resistant cast plates, with a service life of no less than 30 years.

PRODUCT PICTURES:

slag dragging machine semiautomatic slag extractor for lead smelting refining furnace 

slag dragging machine semiautomatic slag extractor for lead smelting refining furnace 

slag dragging machine semiautomatic slag extractor for lead smelting refining furnace 

slag dragging machine semiautomatic slag extractor for lead smelting refining furnace 

SPECIFICATIONS:

slag dragging machine semiautomatic slag extractor for lead smelting refining furnace