In the process of aluminum ingot casting, the casting process of casting molten aluminum in a mold and then cooling and forming is a common process for aluminum ingot forming, so the ingot casting machine is an essential equipment in the aluminum alloy ingot casting production line.
The aluminum ingot casting machine consists of an ingot mold, a demoulding mechanism, a frame, a main transmission mechanism, a water cooling device (or a water spray cooling device), and an aluminum liquid distributor (distribution drum). In addition to being used for aluminum ingot casting, this machine can also be used for lead ingot casting.
Since 2020, the non-ferrous metal smelting industry has maintained stable development, but due to the global outbreak of the new crown epidemic, my country's non-ferrous metal smelting industry has been affected to a certain extent. However, with the rapid resumption of work and production in China, the non-ferrous metal smelting industry is gradually returning to growth.
It includes electrical control, motor, transmission shaft, frame, pump shell, impeller, lead pipe and lead pipe movable joint. There are two connecting flanges at the output end of the transmission shaft. The flange output shaft close to the pump body is fixed with nuts.
First of all, the Intermediate pot/tundish should place in a corner of the Lead pot stove according to the layout drawing, try to ensure that the lead liquid reflux distance is not too far, And Space shall be reserved for the installation position of the intermediate pot to adjust the lead rod;
On July 9, 2022, the lead mud mixing tank and forced desulfurizer pre-system designed and manufactured by Xiangtan Lufeng Machinery Co., Ltd. were successfully loaded and shipped. Considering that if the goods are sent to the port for loading, it is very troublesome and very difficult. Therefore, this shipment is to pull a 40-foot flat container to the factory for loading.