Products

New Products

View as

lead copper slag casting after smelting furnace recycle production line
lead copper slag casting after smelting furnace recycle  production line Slag casting machine The slag casting machine is used for casting ingots of lead oxide slag. After cooling, the slag ingots are removed from the slag casting mold, or stored or transported away. Multiple casting slag molds are fixed on the chain and supported on the track by rollers. As the chain moves, the casting slag mold slowly moves at the same time. Liquid hot slag flows into an adjustable angle chute from the smelting furnace, and is continuously and evenly injected into the casting slag mold through the chute. After slow cooling, the slag ingot is released from the casting slag mold at the head wheel. The slag casting machine is inclined at a 4.0 ° angle to the ground. To prevent possible reversal, a backstop is installed at the other end of the output shaft on the small reducer of the head wheel transmission device. The slag casting machine is equipped with a cooling water spray device. If necessary, the slag ingot can be accelerated to detach from the slag casting mold through vibration. The demolding vibration adopts a pneumatic mechanism, and the pneumatic components are controlled by a two position three way electric control stop valve. The pulse signal of the control valve is obtained from the proximity switch at the head wheel axle end, and the gas supply time lasts for 1 second and can be adjusted before entering the next cycle. By variable frequency speed regulation of the slag casting machine driving motor, the running speed of the chain can be adjusted, thereby adjusting the cooling time of the slag ingot. Ensure the safety of the equipment by providing overcurrent protection and torque limiting coupling for the drive motor of the slag casting machine. The operation of the slag casting machine should be interlocked with the rotation of the tilting packaging upper rotating frame.
Read More Send Inquiry Read More
waste lead acid battery manufacturing plant recycle automatic crusher and sorting machine system
waste lead acid battery manufacturing plant recycle automatic crusher and sorting machine system 
Read More Send Inquiry Read More
Copper concentrate refining electrolysis system anode electrolytic round disc plate casting machine
copper concentrate refining electrolysis system anode electrolytic round disc plate casting machine   The processing process of lead-zinc ore usually includes the following main steps: 1. Mineral processing: Lead zinc ore is selected and graded to select ore with high lead and zinc content. 2. Crushing and grinding: The selected lead zinc ore is subjected to crushing and grinding operations to make its particle size suitable for subsequent processing. 3. Flotation: Flotation operations are carried out on the crushed and ground lead-zinc ore, utilizing the differences in density, buoyancy, and surface properties between lead-zinc ore and other minerals to obtain lead concentrate and zinc concentrate. 4. Separation: separate the flotation lead and zinc concentrate, including flotation foam separation, centrifugal separation and gravity separation, to obtain pure lead concentrate and pure zinc concentrate. 5. Reflotation: Perform a reflation operation on zinc concentrate to further improve zinc grade and extraction rate. 6. Smelting: Place pure lead concentrate and pure zinc concentrate into a furnace for high-temperature melting, allowing the lead and zinc to melt separately and obtain pure lead and zinc ingots. 7. Refining: Further refining of lead and zinc ingots, including smelting, deoxidation, screening, alloying, and other operations, to improve product purity and quality. It should be noted that the process described above is a general lead-zinc ore treatment process, and the specific process parameters and steps may vary depending on the ore and product requirements. In practical applications, it is also necessary to consider the economy, environmental protection, and product quality requirements of the process. Meanwhile, the treatment of lead-zinc ore is a complex process that requires professional personnel and equipment to operate.
Read More Send Inquiry Read More
Metal & metallurgy machinery copper lead anode plate hanger metal for scrap lead battery electrolysis recycle machine
metal & metallurgy machinery copper lead anode plate hanger metal for scrap lead battery electrolysis recycle machine An anode hanger for electrolytic cells This utility model discloses an anode hanger for an electrolytic cell. The top of the copper beam is provided with several pole installation holes, and the copper beam is located on both sides of the pole installation hole with assembly holes and screw holes respectively. The two sides of the copper beam are symmetrically provided with several screw holes, and the bottom end of the electrode rod is equipped with a connection section. The electrode rod is inserted into the pole installation hole at the top of the copper beam through the connection section and connected with bolts, and the outer part of the electrode rod is equipped with a protective sleeve, The top of the protective sleeve is provided with a groove between the electrode rod and the electrode rod. The outer sleeve of the electrode rod is equipped with a screw thread, and the bottom end of the screw thread is arranged in the groove. The utility model has a reasonable structure, which is more convenient than traditional welding methods. On the one hand, it ensures the stability of the connection, and solves the problem of welding causing skewness. The upper end of the protective sleeve is provided with a groove, and the bottom end of the screw thread is located in the groove of the protective sleeve, greatly improving the stability of the screw thread and the protective sleeve, And reduce the probability of slipping, thereby ensuring overall performance
Read More Send Inquiry Read More
Lead acid battery recycling system lead anode plate casting machine electrolysis machine line
lead acid battery recycling system  lead anode plate casting machine electrolysis machine line Lead anode plate automatic line Firstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it. The disc rotates to the plate taking frame, and the proximity switch sends a signal to the PLC. The PLC sends instructions to the plate catching hook to automatically pick up the ingot and then transmit it to the conveyor belt. This plate catching hook has three hooks, and during one cycle of the disc rotation, The lead ingots are automatically picked up and transported to the conveyor belt in time and sections, forming an automatic flow process. The completion of this process mainly relies on the proximity switch providing different signals and the PLC setting different commands. 1. Main use: This equipment is matched with a lead melting furnace, and the molten lead is pumped into a lead ingot quantitative pouring container through a lead pump. The lead water is then quantitatively poured into the mold, cooled by the mold, and turned into a standard lead resistance plate. Then, it is transported to the plate conveyor through an automatic plate pulling and flat plate device. 2. Product composition: lead quantitative pouring device, disc rack, ingot mold, automatic plate pulling mechanism, flat plate mechanism, conveying and arranging plate transportation mechanism, and electrical control system.
Read More Send Inquiry Read More
High temperature cast steel lead liquid or zinc transfer pump
high temperature cast steel lead liquid or zinc transfer pump  Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impeller。 The detailed requirements and assembly requirements for all spare parts of the complete lead pump include the pump body bottom plate, pump body, valve, valve guide rod, valve core, lead pump blade, lead pump shaft sleeve, lead pump wear sleeve, etc. The lead pump wear sleeve adopts a spiral wear resistant design, and the lead pump design has a reflux function. Excess lead liquid can be returned to the lead pot. The lead pump valve is designed with a heating pipe to prevent cooling blockage during the lead liquid transportation process.
Read More Send Inquiry Read More