Products

New Products

View as

disc round lead anode casting machine scrap lead battery recycling for electrolysis system
disc round lead anode casting machine scrap lead battery recycling  for electrolysis system Lead anode plate automatic line Firstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it. The disc rotates to the plate taking frame, and the proximity switch sends a signal to the PLC. The PLC sends instructions to the plate catching hook to automatically pick up the ingot and then transmit it to the conveyor belt. This plate catching hook has three hooks, and during one cycle of the disc rotation, The lead ingots are automatically picked up and transported to the conveyor belt in time and sections, forming an automatic flow process. The completion of this process mainly relies on the proximity switch providing different signals and the PLC setting different commands. 1. Main use: This equipment is matched with a lead melting furnace, and the molten lead is pumped into a lead ingot quantitative pouring container through a lead pump. The lead water is then quantitatively poured into the mold, cooled by the mold, and turned into a standard lead resistance plate. Then, it is transported to the plate conveyor through an automatic plate pulling and flat plate device. 2. Product composition: lead quantitative pouring device, disc rack, ingot mold, automatic plate pulling mechanism, flat plate mechanism, conveying and arranging plate transportation mechanism, and electrical control system.
Read More Send Inquiry Read More
copper round tube polishing machine of cathode electrolytic polishing machine for metal
copper round tube polishing machine  of cathode electrolytic polishing machine for metal The light bar polishing machine is used to clean the cathode copper rod after electrolysis, ensuring good surface conductivity. There are two key points to note when operating the lead electrolysis light rod machine: One is that the copper rod is very heavy and difficult to transport after being pulled out; The second issue is that there is a lot of noise when cleaning copper bars. To solve these two problems, the existing light bar machine is designed with a bucket containing copper bars, which can be lifted by a crane, and the bucket can be directly placed on the frame of the light bar machine. The bucket door can be opened directly to allow the copper bars to fall directly into the cleaning drum. In addition, the surface of the cleaning drum is sandwich and equipped with thick soundproof cotton, which has a good soundproofing effect and improves the quality of the working environment. The inner liner is made of 304 material, which has good corrosion resistance. The entire equipment has been comprehensively considered in terms of performance, quality, and safety, and has been well received by multiple customers
Read More Send Inquiry Read More
lead anode plate hanger battery recycle machine for lead electrolysis cell
lead anode plate hanger  battery recycle machine for lead electrolysis cell   An anode hanger for electrolytic cells This utility model discloses an anode hanger for an electrolytic cell. The top of the copper beam is provided with several pole installation holes, and the copper beam is located on both sides of the pole installation hole with assembly holes and screw holes respectively. The two sides of the copper beam are symmetrically provided with several screw holes, and the bottom end of the electrode rod is equipped with a connection section. The electrode rod is inserted into the pole installation hole at the top of the copper beam through the connection section and connected with bolts, and the outer part of the electrode rod is equipped with a protective sleeve, The top of the protective sleeve is provided with a groove between the electrode rod and the electrode rod. The outer sleeve of the electrode rod is equipped with a screw thread, and the bottom end of the screw thread is arranged in the groove. The utility model has a reasonable structure, which is more convenient than traditional welding methods. On the one hand, it ensures the stability of the connection, and solves the problem of welding causing skewness. The upper end of the protective sleeve is provided with a groove, and the bottom end of the screw thread is located in the groove of the protective sleeve, greatly improving the stability of the screw thread and the protective sleeve, And reduce the probability of slipping, thereby ensuring overall performance
Read More Send Inquiry Read More
lead ore melting furnace battery recycle machine air blast furnace
lead ore melting furnace battery recycle machine air blast furnace  Blast furnace function Blast furnaces can be used for matte smelting of metals such as copper, nickel, cobalt, and reduction smelting of metals such as lead and zinc. They can also be used for melting miscellaneous copper and processing other materials. The charge of a blast furnace is generally block shaped, and the fuel is coke. The furnace materials are added in batches from the top of the furnace to form pillars. Air is blown in from the lower tuyere, and coke burns in the tuyere area, forming a high-temperature melting zone; The furnace material reacts fiercely here and continuously melts. During reduction smelting, the melt clarifies in the furnace hearth, releasing metal and slag separately. During matte smelting, the melt flows into the front bed through this bed, clarifying and separating matte and slag. During the process of hot flue gas passing through the furnace material and rising to the furnace top for discharge, the furnace material is preheated (during smelting and kneading of concentrate, it also causes the concentrate to sinter), and partial smelting chemical reactions occur. So the blast furnace has good heat and mass transfer conditions, high thermal efficiency, and a large daily production capacity per unit area (i.e. bed energy rate).
Read More Send Inquiry Read More
lead or copper anode residual pole scrubber for electrolysis machine system
lead or copper anode residual pole scrubber  for electrolysis machine system lead or Copper electrolysis residual electrode cleaning unit Automation of residual electrode washing in copper electrolysis, energy conservation and environmental protection Residual electrode washing is a very important process in copper electrolysis process. Residual electrode washing is the process of cleaning the anode mud on the residue, cleaning the precious metal mixture on the residue before production, reducing the residual amount of anode mud on the residue, and bringing objective economic benefits to the enterprise. The residual electrode washing automation unit can quickly clean residual electrodes, efficiently and quickly, greatly improving the efficiency of copper electrolysis.
Read More Send Inquiry Read More
copper circle machine anode plate disc round continuous casting line
copper circle machine anode plate disc round  continuous casting line  How to refine copper ingots 1. Copper ingot refers to the electrolytic purification of copper: crude copper (containing 99% copper) is pre made into thick plates as the anode, pure copper is made into thin plates as the cathode, and a mixture of sulfuric acid and copper sulfate is used as the electrolyte. After being electrified, copper dissolves from the anode into copper ions and moves towards the cathode. Upon reaching the cathode, electrons are obtained and pure copper (also known as electrolytic copper) is precipitated at the cathode. 2. Impurities in crude copper, such as iron and zinc, which are more active than copper, will dissolve with copper into ions (Zn and Fe). Due to the difficulty in precipitation of these ions compared to copper ions, adjusting the potential difference appropriately during electrolysis can avoid the precipitation of these ions on the anode. Impurities such as gold and silver, which are less active than copper, are deposited at the bottom of the electrolytic cell. The copper plate produced in this way is called "electrolytic copper" and has extremely high quality, which can be used to make electrical products. The sediment at the bottom of the electrolytic cell is called "anode mud", which is rich in gold and silver and is very valuable. It has extremely high economic value for extraction and processing.
Read More Send Inquiry Read More

Products

Ingot Casting Machine

Melting Furnace

High temperature metal transfer pump

Electrolytic system

Smelting equipment accessories

Lead acid battery recovery and regeneration system

Lead Liquid Mixer

Ingot Molds

Lead Smelting Pot

Dust Collector System

Slag Casting Machine

New Products

lead acid battery recycling system lead anode plate casting machine electrolysis machine line

high temperature cast steel lead liquid or zinc transfer pump

Lead melting pot cover for lead refining furnace can custom size according requires or design

2024 hot selling Price lead light polishing rod machine for Scrap lead battery electrolysis system

customized size high temperature nodular cast iron materials zinc ingot molds lead molds

PRODUCTS

disc round lead anode casting machine scrap lead battery recycling for electrolysis system

copper round tube polishing machine of cathode electrolytic polishing machine for metal

lead anode plate hanger battery recycle machine for lead electrolysis cell

lead ore melting furnace battery recycle machine air blast furnace

lead or copper anode residual pole scrubber for electrolysis machine system

copper circle machine anode plate disc round continuous casting line