Matters needing attention in the production process of the ingot casting machine

In recent years, with the rapid development of domestic aluminum smelting industry, especially the secondary aluminum industry, aluminum casting equipment has been widely used. Due to the wide application range of ship-shaped ingots, its casting equipment-chain ingot casting machine is relatively widely used.

The ingot casting machine generally includes a mechanical frame, a liquid aluminum distribution system, a cooling system, a demoulding system, a transmission system, a mold, etc. It can also be customized according to production needs. The ingot casting machine will encounter different problems in the process of manufacturing. The ingot casting machine produced by our company provides customers with perfect after-sales service. In the process of casting aluminum rods, the chemical composition and structure of aluminum rods are uneven. At the same time, there is generally residual stress inside. In order to eliminate the residual stress of the ingot, eliminate the uneven chemical composition and structure of the ingot, and then improve the pressure processing technology of the ingot and some final properties of the product, this The ingot must be treated uniformly, and the homogenization treatment of the ingot is carried out in the homogenization furnace.

Matters needing attention in the production process of the ingot casting machine

The hot air circulation system of the homogenizing furnace adopts several fans with large air volume to be used in parallel to ensure a very small temperature difference in the furnace. The heating system of the homogenizing furnace uses multiple burners for multi-point heating, and the combustion of the burners is controlled proportionally to ensure complete combustion and uniform furnace temperature. The loading and unloading of the homogenizing furnace is completed by the composite three-dimensional material car. The composite three-dimensional material car can move in the six directions of front, rear, left, right, up and down, and the loading and unloading is carried out automatically.

The cooling system of the homogenizing furnace is a combination of air cooling and water cooling, and the aluminum profile achieves a good cooling effect at a low cost. The rule of the aluminum industry is to pay attention to the production process of the ingot casting machine when the ingot casting machine is produced. The difference in the process will cause the quality of the finished product produced by the ingot casting machine, and the quality of the finished product determines the product sales market.